MadStyle mascot MADSTYLEcreate as we feel

Guides · November 18, 2026

Table Throw Sizes: 6 ft vs 8 ft, Draped vs Fitted

A printed table throw turns a plain folding table into a branded booth in about thirty seconds. It is also one of the most confusing items to set up a file for, because the finished product is three-dimensional but the print file is flat. This guide explains the standard table sizes, the difference between draped and fitted throws and between 3-sided and 4-sided ones, and how those choices turn into the flat dimensions a print shop needs.

Standard table sizes

Most event tables in the US are rectangular folding tables in two lengths:

  • 6 ft table: 72 in long, typically 30 in deep and 30 in high.
  • 8 ft table: 96 in long, typically 30 in deep and 30 in high.

Some tables are narrower — 24 in or 18 in deep — so measure the actual table if you are not sure. Trade-show organizers often list the table size in the exhibitor kit; 6 ft is very common for smaller booths and vendor fairs, 8 ft for larger spaces.

Draped vs fitted

Draped throws (also called loose or standard throws) are one large rectangle-style piece laid over the table. The corners fold and hang loosely, and the edge typically stops a few inches above the floor. They fit a range of tables, pack small and are the most common choice.

Fitted throws are sewn at the corners so the cover takes the shape of the table, like a box. They look sharper and drop almost to the floor, but they fit only the table size they were made for.

3-sided vs 4-sided

4-sided throws cover the front, both sides and the back. Use them when the table is visible from all directions, such as in an island booth or a lobby.

3-sided throws cover the front and sides, leaving the back open so you can sit with your legs under the table and store boxes and bags out of sight. A short flap usually hangs down the back edge so the cover doesn't slide forward. For most vendor booths against a wall or backdrop, 3-sided is the practical choice.

How the flat size is worked out

A throw is printed flat and then hemmed or sewn. Common practice is one cross-shaped piece: the table top sits in the middle, with the front, back and side panels around it. The overall width is the table length plus a drop on each end; the overall height is the table depth plus a drop on the front and either a drop or a short flap on the back.

On a standard 30 in deep, 30 in high table, the Table Throw Builder uses these flat layout sizes:

Table and style4-sided3-sided
6 ft draped126 × 84 in126 × 62 in
8 ft draped150 × 84 in150 × 62 in
6 ft fitted130.5 × 88.5 in130.5 × 64.25 in
8 ft fitted154.5 × 88.5 in154.5 × 64.25 in

You can read the math straight from the table. A 6 ft draped 4-sided throw is 72 in of table plus a 27 in drop on each end (126 in), and 30 in of depth plus a 27 in drop front and back (84 in). The draped drop stops about 3 in off the floor. The 3-sided version swaps the back drop for a 5 in flap: 30 + 27 + 5 = 62 in. Fitted versions use a longer drop so they reach nearly to the floor.

Finished sewn sizes vary from shop to shop. If your printer has its own template, trim to theirs.

Bleed and safe zones

Table throws are usually sewn with hems, and the corners fold or are stitched, so give the file generous margins. The builder exports a 1 in bleed on every side and marks 2 in safe zones around each panel. Keep logos and text off the fold lines and away from the corners, where fabric bunches on draped throws.

Where to put logos and text

  • Front panel: the main logo and any headline. This is what people see as they walk by.
  • Below the table edge: put text on the front panel, not on the top. Laptops, brochures and product displays cover the table top during an event.
  • Sides (and back on 4-sided): smaller repeat logos. Turn them so they read upright from that side when the throw is on the table.
  • The top: usually background only.

Short beats long. A logo and a few words — what you do or your website — read better than a list of services.

Background options

A solid color is the classic look and hides wrinkles well. Gradients add depth. A full photo background can look great on the front panel but will fold over corners, so check how it lands on the table. Make sure the logo stands out from whatever is behind it.

Material and resolution

Most printed table throws are polyester fabric printed by dye sublimation, which bonds the ink into the fibers so the throw can be folded, packed and usually washed. Because the throw is seen from a few feet away, photos at about 100–150 PPI at final size are plenty. Logos should be vector (SVG, PDF) or a high-resolution transparent PNG. Bright RGB colors may shift when converted to CMYK, especially greens and blues — see CMYK vs RGB.

Checklist

  • Measure the table: length, depth and height.
  • Choose draped or fitted, then 3-sided or 4-sided.
  • Confirm the flat size with your printer or use their template.
  • Add bleed and keep content inside safe zones, off folds and corners.
  • Main logo and text on the front, below the table edge.
  • Rotate side logos to read upright.
  • Send a CMYK PDF and a guide showing panels and folds.

The Table Throw Builder does all of this for 6 ft and 8 ft tables, with a free preview and a 2-page PDF that includes a guide page for the print shop.