Almost every banner, backdrop and table throw carries a logo, and the logo is usually the part people look at hardest. It is also where most large-format jobs go wrong: a file grabbed from a website, a JPG with a white box around it, or a tiny image stretched across several feet. This guide explains the kinds of logo files you'll come across, which ones to ask for, and how to check that a logo will print cleanly at large sizes.
Vector vs raster
Logo files come in two basic kinds:
- Vector files describe the logo as mathematical shapes — lines, curves and fills. They can be scaled to any size, from a business card to a building, without losing sharpness. Common vector formats are SVG, PDF, AI (Adobe Illustrator) and EPS.
- Raster files are grids of pixels. They have a fixed number of pixels, so enlarging them past a certain point makes edges soft or blocky. Common raster formats are PNG, JPG, TIFF and WebP.
For large-format print, vector is always the first choice. Text and logo edges stay perfectly crisp, colors can be adjusted precisely, and the file size stays small.
Which file to ask for
When you ask a client or sponsor for a logo, be specific. A good request reads something like: "Please send your logo as a vector file (SVG, PDF, AI or EPS). If you don't have one, a PNG with a transparent background at least 3,000 pixels wide." Many businesses have a brand folder from whoever designed their logo; the vector file is usually in there even if they don't know what it is.
Be aware that a file with a vector extension can still contain a raster image. An EPS or PDF that was made by placing a JPG inside it is just a raster in a wrapper. Zoom in a long way: if the edges stay sharp, it's real vector; if they turn into squares, it isn't.
Transparent backgrounds
A logo on a white background looks fine on a white page, but on a colored backdrop or table throw that white becomes a visible rectangle. To avoid it:
- Use a vector file, which normally has no background at all.
- Or use a PNG with a transparent background. In most design apps, transparency shows as a gray-and-white checkerboard.
- JPG files cannot be transparent. A JPG logo will always have a solid background, so avoid JPG for logos that sit on color.
How big does a raster logo need to be?
Work out the printed size first, then multiply by the resolution you need. For banners and backdrops viewed from a few feet, about 100–150 pixels per inch at final size is a common target:
- A logo printed 18 in wide at 100 PPI needs 1,800 pixels of width.
- A logo printed 36 in wide on a table throw front at 100 PPI needs 3,600 pixels.
- A logo printed 12 in wide at 150 PPI needs 1,800 pixels.
A logo saved from a website or social profile is often only a few hundred pixels wide — fine on screen, far too small for print. The MadStyle builders show the effective resolution of each upload and flag files that are low or too low, so you can replace them before paying.
Don't fake resolution
Enlarging a small logo in an image editor or "saving it at 300 DPI" does not add detail. The software invents pixels by blending existing ones, which gives soft edges. AI upscalers can help with photos, but they often distort logo letterforms and fine lines. For a logo, the right fix is to get the original file or have the logo redrawn as vector by a designer.
One-color and reversed versions
Most professional logos have alternate versions: full color, one color (all black) and reversed (all white). These are useful in large format:
- On dark backgrounds, a white version reads better than a full-color logo with dark elements.
- On step-and-repeat walls with many sponsors, converting every logo to one color gives a clean, unified look and avoids clashing colors.
- On busy photo backgrounds, a one-color version stands out more clearly.
If every logo is a vector SVG, the Logo Wall Builder can recolor them all to white, black or a custom color. PNG and JPG logos keep their original colors because their pixels can't be recolored cleanly.
Logo color in print
Logos designed on screen are often defined in RGB or HEX. For print, use the brand's CMYK values or Pantone reference if they exist. Bright brand blues, greens and oranges are the colors most likely to shift — see CMYK vs RGB.
Fonts inside logos
If a logo arrives as an editable AI or PDF with live text, the font must be installed or embedded for it to print correctly. Logo text should normally be converted to outlines in the master logo file. If you open a logo and the type looks different from the brand, a font has been substituted.
Common logo problems and fixes
- White box around the logo — get a transparent PNG or vector file.
- Blurry or jagged edges — the file is too small; get a larger original or vector.
- Thin lines disappear — very fine details can vanish at a distance; use a simplified version of the logo if the brand has one.
- Logo blends into the background — use a reversed or one-color version, or change the background.
- Old version of the logo — confirm with the client that you have the current one.
- Logo built from a screenshot — never use screenshots for print.
Permission
A logo belongs to the business that owns it. For sponsor walls and co-branded pieces, make sure each sponsor has approved the use of their logo and, ideally, the final layout. A watermarked preview is an easy way to collect approvals before printing.
Checklist
- Vector file (SVG, PDF, AI, EPS) whenever possible.
- Otherwise a transparent PNG large enough for its printed size.
- No JPGs on colored backgrounds.
- One-color or reversed versions for dark or busy backgrounds.
- CMYK or Pantone values for brand colors.
- Logo text outlined; current version confirmed; use approved.
Ready to put logos to work? The Templates page lists the builders for logo walls, banner stands and table throws.