The retractable banner stand — also called a roll-up or pull-up banner — is the workhorse of trade shows, lobbies and pop-up events. The graphic rolls into an aluminum base, pulls up, and clips to a top rail held by a support pole. It's simple hardware, but it hides parts of your artwork in ways that catch people out. Here is how to set up a file that looks right on the stand.
The standard size: 33 × 80 inches
In the US the most common retractable is 33 in wide by 80 in tall. Other sizes you will see:
- 24 × 80 in — slim stands for tight spaces.
- 36 × 92 in — premium tall stands.
- 48 × 80 in — wide stands.
- 11.75 × 17.5 in — tabletop stands (about A3).
- 85 × 200 cm — a common metric size.
Some shops sell 33 × 81 or 33.5 × 80. Always build the file for the exact hardware you or your printer is using.
Hidden areas: the rail and the base
A retractable never shows the full height of the graphic:
- Top rail. The top edge is clamped or taped inside a rail. Plan on about 1 in of artwork being hidden.
- Base. The bottom of the graphic stays inside the base cassette. On many standard stands that is about 3 in; premium or adjustable stands can hide 6 in or more.
Artwork should run edge to edge through those bands — you don't want a hard line where the rail or base meets the graphic — but nothing important should be inside them.
The other question is whether the shop wants those hidden amounts inside the 80 in or added on. Some printers ask for a file exactly 33 × 80 with the hidden zones inside; others want extra length, such as 33 × 84, so the visible area is a full 80 in. Ask, and label the file with both the visible and the file size if they differ. The Banner Stand Builder keeps the zones inside the size you choose unless you turn on extra length, and it never adds length silently.
Lay out for eye level
A banner stand is tall and narrow, and people see it standing up, often from across a room. Think of the height in zones:
- Top third (roughly 55–80 in from the floor): the most visible area. Put your logo or brand name here so it can be seen over crowds and tables.
- Middle (roughly 30–55 in): eye level for most adults standing close. This is where the main message, a short list of services or a key image belongs.
- Bottom (below about 30 in): often blocked by tables, chairs, bags and people. Use it for background, imagery or a website — not critical information.
Keep text short. A retractable is read in a few seconds as people walk past, so a headline, a handful of supporting words and one call to action usually work better than paragraphs.
Side margins
Keep text and logos at least an inch or so from the left and right edges. The graphic is cut to width and may sit slightly unevenly in the base, so content tight to the edge can look crooked.
Resolution
Retractables are seen from a few feet away, so 100–150 PPI at final size is a good target for photos:
- 33 × 80 in at 150 PPI = 4,950 × 12,000 pixels.
- 33 × 80 in at 100 PPI = 3,300 × 8,000 pixels.
The Banner Stand Builder shows the effective PPI of placed art: 100+ is great, 60–100 is acceptable for banner viewing distance, and under 60 may look soft. Logos and text should be vector wherever possible. The Dimension Converter can calculate pixel sizes for any stand.
Material
Retractable graphics need to roll and unroll many times while hanging flat. Shops usually print them on a curl-resistant material such as a polyester film or a smooth banner vinyl designed for stands, rather than standard hemmed outdoor vinyl. Your file doesn't change with material, but it is worth asking the shop what they use if the banner will be set up and taken down often.
QR codes on a banner stand
QR codes are popular on retractables, but a code that is too small won't scan from a few feet away. Aim for about 3 in square or larger, keep a white quiet zone around it, place it in the visible safe area (not near the base) and test it with a phone before printing. Use a vector QR code so it stays crisp. The Banner Stand Builder can add one and warns you if it is under about 3 in.
Color and file format
Send a CMYK PDF at the exact size the shop asked for, with fonts embedded or outlined and images at full resolution. See CMYK vs RGB and PDF export settings for print shops for details.
Checklist
- Confirm stand size and whether hidden areas are inside or added to the file.
- Logo near the top, message at eye level, nothing critical near the base.
- Background runs through the rail and base areas.
- Photos at 100–150 PPI at final size; logos and text as vector.
- QR code about 3 in or larger, tested.
- CMYK PDF, clearly named with size.